LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1994 >> Corolla Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Starter >> On-Vehicle Testing >> Starter Relay Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Starter Relay Test

  1. Locate and remove starter relay. See STARTER RELAY LOCATION  table. See Fig 2. Using ohmmeter, verify continuity between relay terminals No. 1 and 2. See Fig 1. Continuity should not exist between terminals No. 3 and 5. If continuity is not as indicated, replace relay.
  2. Check relay operation by applying battery voltage through terminals No. 1 and 2. See Fig 1. Continuity should now exist between terminals No. 3 and 5. If relay does not test as indicated, replace relay.
Fig 1: Testing Starter Relay
G93A82271Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Fig 2: Locating Starter Relay
G93E02157Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
STARTER RELAY LOCATION

Application Location
Corolla (1) Top Relay, Driver's Side Fuse/Relay Block No. 1
(1) Relay is grounded by theft deterrent system ECU (if equipped).
scientia non olet · About LEMON Manuals