Power Mirror Motor Test
NOTE:
Mirror motor connectors may vary in configuration from vehicle to vehicle of the same model.
Disconnect power mirror motor harness connector. Using 12-volt power source, connect positive and negative leads to specified pins or terminals. See POWER MIRROR MOTOR TEST table. See Figure. If power mirror motor fails any test, replace power mirror assembly.
POWER MIRROR MOTOR TEST
| Apply 12 Volts To Pin No. | Ground Pin No. | Mirror Operation |
|---|---|---|
| 1 | 2 | Up |
| 2 | 1 | Down |
| 3 | 2 | Left |
| 2 | 3 | Right |