Starter Relay
- Locate and remove starter relay. See STARTER RELAY LOCATION table. See Fig 2. Using ohmmeter, verify continuity between relay terminals No. 1 and 3. See Fig 1. Continuity should not exist between terminals No. 2 and 4. If continuity is not as indicated, replace relay.
- Check relay operation by applying battery voltage through terminals No. 1 and 3. See Fig 1. Continuity should now exist between terminals No. 2 and 4. If relay does not test as indicated, replace relay.
STARTER RELAY LOCATION
| Application | Location |
|---|---|
| Tercel | In Center Console, Above Radio |