Fuel Pump Resistor
- Ensure ignition is off. Disconnect fuel pump resistor electrical connector. See FUEL PUMP RESISTOR LOCATION table. See Fig 1.NOTE: On Turbo, ensure proper resistor is checked, as fuel injector solenoid resistor is located near fuel pump resistor.
- Using ohmmeter, measure resistance between fuel pump resistor electrical terminals. Replace fuel pump resistor if resistance is not within specification. See FUEL PUMP RESISTOR SPECIFICATIONS table.
FUEL PUMP RESISTOR LOCATION
| Application | Location |
|---|---|
| Turbo | Driver's Side Rear Corner Of Engine Bay, & Contains 2-Wire Connector |
FUEL PUMP RESISTOR SPECIFICATIONS
| Application | Ohms @ 68°F (20°C) |
|---|---|
| Turbo | .73 |