Distributor Sensors

DISTRIBUTOR PICK-UP COIL AIR GAP

Application	In. (mm)
Previa	.008-.020 (.20-.51)

DISTRIBUTOR PICK-UP COIL RESISTANCE

Application

⁽¹⁾ Pick-Up Coil Terminals

Ohms

2.4L Supercharged (2TZ-FZE) ⁽⁴⁾

Cold ⁽²⁾

⁽⁵⁾

125-200

Hot ⁽³⁾

⁽⁵⁾

160-235

2.4L Non-Supercharged (2TZ-FE) ⁽⁶⁾

Cold ⁽²⁾

G1 & G-

125-200

Cold ⁽²⁾

G2 & G-

125-200

Cold ⁽²⁾

NE & G-

155-250

Hot ⁽³⁾

G1 & G-

160-235

Hot ⁽³⁾

G2 & G-

160-235

Hot ⁽³⁾

NE & G-

190-290

⁽¹⁾	For proper testing and terminal identification, see the BASIC TESTING article.

⁽²⁾	Cold is with temperature of 14-122°F (-10-50°C).

⁽³⁾	Hot is with temperature of 122-212°F (50-100°C).

⁽⁴⁾	This is the supercharged model.

⁽⁵⁾	Measure resistance between terminals on pick-up coil.

⁽⁶⁾	This is the non-supercharged model.

CRANKSHAFT POSITION SENSOR RESISTANCE - SUPERCHARGED MODELS

Application

Ohms

Cold ⁽¹⁾

1630-2740

Hot ⁽²⁾

2065-3225

⁽¹⁾	Cold is with temperature of 14-122°F (-10-50°C).

⁽²⁾	Hot is with temperature of 122-212°F (50-100°C).