LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 1998 >> T100 SR5, 4WD, Automatic >> Repair and Diagnosis >> Engine Performance >> Specifications >> Engine Controls - Specifications >> Fuel System >> Throttle Position (TP) Sensor
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Throttle Position (TP) Sensor

AVALON TP SENSOR RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
3.0L (1) Fully Closed VTA & E2 200-6300
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
(1) Apply vacuum to throttle opener before checking TP sensor.
CAMRY TP SENSOR RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
2.2L 4-Cyl. (1) Fully Closed VTA & E2 200-5700
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
3.0L V6 (1) Fully Closed VTA & E2 200-6300
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
(1) Apply vacuum to throttle opener before checking TP sensor.
CELICA TP SENSOR RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
2.2L (1) Fully Closed VTA & E2 200-5700
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
(1) Apply vacuum to throttle opener before checking TP sensor.
COROLLA TP SENSOR RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
1.8L Fully Closed VTA & E2 200-5700
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
LAND CRUISER & LX470 TP SENSOR RESISTANCE SPECIFICATIONS

Application Type Terminals Tested Ohmmeter Reading
4.7L VC & E2 (1) 1250-2350
(1) Resistance at 68°F (20°C).
RAV4 TP SENSOR RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
2.0L (1) Fully Closed VTA & E2 200-5700
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
(1) Apply vacuum to throttle opener before checking TP sensor.
SIENNA TP SENSOR RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
3.0L (1) Fully Closed VTA & E2 200-6300
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
(1) Apply vacuum to throttle opener before checking TP sensor.
SUPRA NON-TURBO TP SENSOR RESISTANCE SPECIFICATIONS

Application Terminals Ohmmeter Reading
3.0L VC & E2 (1) 1200-3200
(1) Resistance at 68°F (20°C).
SUPRA TURBO MAIN TP SENSOR RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
3.0L (1) Fully Closed VTA & E2 340-6300
" .027 (.69) IDL & E2 500 Or Less
" .032 (.81) IDL & E2 No Continuity
" Fully Open VTA & E2 2400-11,200
" " VC & E2 3100-7200
(1) Apply vacuum to throttle opener before checking TP sensor.
SUPRA TURBO SUB-TP SENSOR RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
3.0L Fully Closed VTA & E2 300-6300
" .016 (.41) IDL & E2 500 Or Less
" .019 (.48) IDL & E2 No Continuity
" Fully Open VTA & E2 2000-10,800
" " VC & E2 3500-6500
TACOMA TP SENSOR RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
2.4L 4-Cyl. (1) Fully Closed VTA & E2 200-5700
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
2.7L 4-Cyl. (1) Fully Closed VTA & E2 200-5700
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
3.4L V6 (1) Fully Closed VTA & E2 200-5700
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
(1) Apply vacuum to throttle opener before checking TP sensor.
TERCEL TP SENSOR RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
1.5L (1) Fully Closed VTA & E2 200-5700
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
(1) On A/T models, disconnect throttle cable from linkage before checking TP sensor.
T100 TP SENSOR RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
2.7L 4-Cyl. (1) Fully Closed VTA & E2 200-5700
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
3.4L V6 (1) Fully Closed VTA & E2 200-5700
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
(1) Apply vacuum to throttle opener before checking TP sensor.
4RUNNER TP SENSOR RESISTANCE SPECIFICATIONS

Application Type Clearance In. (mm) Terminals Tested Ohmmeter Reading
2.7L 4-Cyl. (1) Fully Closed VTA & E2 200-5700
" Fully Open VTA & E2 2000-10,200
" " VC & E2 2500-5900
3.4L V6 (1) Fully Closed VTA & E2 280-6400
" Fully Open VTA & E2 2000-11,600
" " VC & E2 2700-7700
(1) Apply vacuum to throttle opener before checking TP sensor.
scientia non olet · About LEMON Manuals