LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2000 >> 4Runner Base, 4WD >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Engine Immobilizer Systems >> Programming >> Additional Master Key Registration >> Using Brake Pedal & Accelerator Pedal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Brake Pedal & Accelerator Pedal

  1. Insert registered master key into ignition lock cylinder. Within 15 seconds of inserting master key into ignition lock cylinder, depress and release accelerator pedal 5 times.
  2. Within 20 seconds of depressing and releasing accelerator pedal, depress and release brake pedal 6 times. Remove master key from ignition lock cylinder.
  3. Within 10 seconds of removing master key from ignition lock cylinder, insert master key to be registered in ignition lock cylinder.
  4. Within 10 seconds of inserting master key to be registered in ignition lock cylinder, depress and release accelerator pedal one time. Ensure SECURITY indicator light flashes. SECURITY indicator light is located on instrument panel, above air conditioning controls.
  5. After one minute, additional master key should be registered. SECURITY indicator light should turn off.
  6. If registering additional master keys, repeat process starting with step  3 within 10 seconds. Registration mode is complete after removing master key from ignition lock cylinder within 10 seconds and brake pedal is depressed or SECURITY indicator has turned off for at least 10 seconds.
scientia non olet · About LEMON Manuals