LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2000 >> ECHO 2D Sedan, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Keyless Entry System >> Programming >> Vehicle Access Code Programming
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Vehicle Access Code Programming

  1. Ensure key is not in ignition switch. Open and unlock driver's door. Close and lock other doors.
  2. Perform this step in 5 seconds or less. Insert key in ignition switch, then remove. Repeat procedure by inserting key in ignition switch, then removing. Go to next step.
  3. Perform this step in 40 seconds or less. Press door lock control switch 5 times to LOCK/UNLOCK at about one-second intervals. Close driver's door. Open driver's door.
  4. Perform this step in 40 seconds or less. Open and close door 2 times. Insert key in ignition switch, then remove. Go to next step.
  5. Perform this step in 40 seconds or less. Open and close door 2 times. Insert and leave key in ignition switch. Go to next step.
  6. Turn ignition switch from ON to LOCK positions, at about one-second intervals, one to 5 times to select mode. To put system in add mode, turn ignition switch for one second from ON to LOCK position one time. To put system in rewrite mode, turn ignition switch from ON to LOCK position 2 times at about one-second intervals. To put system in confirmation mode, turn ignition switch from ON to LOCK position 3 times at about one-second intervals. To put system in prohibition mode, turn ignition switch from ON to LOCK position 5 times at about one-second intervals. Remove key from ignition switch. If add or rewrite mode is selected, go to next step. If confirmation mode is selected, go to step  8. If prohibition mode is selected, door control relay performs LOCK/UNLOCK operation 5 times at one-second intervals.
  7. This step will be performed in 3 seconds or less. Door control relay automatically performs LOCK/UNLOCK operation one time at one-second intervals to inform operator that add mode has been selected. Door control relay automatically performs LOCK/UNLOCK operation twice at one-second intervals to inform operator that rewrite mode has been selected. Within 40 seconds of LOCK/UNLOCK operation, simultaneously press LOCK and UNLOCK buttons on transmitter for more than one second, then go to step  9.
  8. This step will be performed in 3 seconds or less. Door control relay automatically performs LOCK/UNLOCK operation 1-4 times at 2-second intervals to inform operator how many recognition codes have been entered.
  9. Within 3 seconds, press any one of 2 transmitter buttons for more than one second. Door control relay automatically performs LOCK/UNLOCK operation 1-2 times at one-second intervals to inform operator whether receiver has received transmitter signal. When no registered codes are programmed, LOCK/UNLOCK occurs 2 times. If LOCK/UNLOCK occurs once, registration of recognition code is completed.
  10. After programming is completed, registration of recognition code is completed 40 seconds after door control relay response, driver's door is closed, key is inserted in ignition switch, or 4 types of recognition codes are registered at one time.
scientia non olet · About LEMON Manuals