LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2000 >> Land Cruiser >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Controls - System & Component Testing - 4-Cylinder) >> Computerized Engine Controls >> Fuel Pump Control Circuit >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Control Circuit: Notes

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2000 Toyota Tacoma, 2000 Toyota RAV4, 2000 Toyota ECHO, 2000 Toyota Corolla, and 2000 Toyota Celica. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: If Engine Control Module (ECM) replacement is instructed in the following testing, always ensure ECM wiring harness electrical connector and ground circuit are okay. If either are suspect, repair and repeat testing to confirm ECM malfunction. On Camry gasoline models and Camry Solara, if ECM is replaced, ECM must be programmed with proper ignition key code for engine immobilizer system. For programming procedures, see COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION, or appropriate ENGINE IMMOBILIZER SYSTEMS article in ACCESSORIES & EQUIPMENT.