One Power Door Lock Does Not Work
WARNING: This page is about a different car, the 2000 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.
- Testing Power Door Lock Motor & Circuit
Remove door panel of affected door lock. Using fused jumper wires, apply battery voltage and ground to appropriate door lock terminals and observe door lock operation. See Figure. See DOOR LOCK MOTOR TEST table. If door lock operates as specified, go to next step. If door lock does not operate as specified, replace door lock assembly and retest.DOOR LOCK MOTOR TESTDoor Apply B+ Voltage To Terminal No. Apply Ground To Terminal No. Result LF 1 2 Unlock 2 1 Lock RF 5 6 Unlock 6 5 Lock LR 1 2 Unlock 2 1 Lock RR 4 3 Unlock 3 4 Lock - Check for open/short circuits in pertinent wiring between affected door lock motor, body control ECU, or individual door ECUs on front doors. See WIRING DIAGRAMS . Repair as necessary and retest system.