LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2001 >> RAV4 Base, AWD, Standard >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Engine Immobilizer Systems >> Programming >> Additional Sub-Key Registration >> Using Brake & Accelerator Pedal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Using Brake & Accelerator Pedal

  1. Insert registered master key in ignition lock cylinder. Within 15 seconds of inserting master key into ignition lock cylinder, depress and release accelerator pedal 4 times.
  2. Within 20 seconds of depressing and releasing accelerator pedal 4 times, depress and release brake pedal 5 times and remove master key from ignition lock cylinder.
  3. Within 10 seconds of removing master key from ignition lock cylinder, insert sub-key to be registered in ignition lock cylinder.
  4. Within 10 seconds of inserting sub-key in ignition lock cylinder, depress and release accelerator pedal one time. Ensure SECURITY indicator light flashes. SECURITY indicator light is located on the dash, just to the left of steering column, next to instrument panel light control knob. See Figure.
  5. After one minute, additional sub-key should be registered and SECURITY indicator light should turn off.
  6. If registering additional sub-keys, repeat process starting with step  3 within 10 seconds.
  7. The registration mode is complete after removing sub-key from ignition lock cylinder and depressing and releasing brake pedal at least once within 10 seconds after SECURITY indicator light has turned off, or at least 10 seconds has passed.
scientia non olet · About LEMON Manuals