Ignition Switch And Key Unlock Warning Switch: Inspection

Inspect Ignition Switch Continuity

Fig 1: Identifying Ignition Switch Terminals
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Fig 2: Determining Ignition Switch Continuity Based On Switch Position
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If continuity is not as specified, replace the switch.
Inspect Ignition Key Illumination Operation
Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check that the indicator light lights up.

Fig 3: Displaying Terminal & Indicator Light
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If operation is not as specified, replace the switch.
Inspect Key Unlock Warning Switch Continuity

Fig 4: Displaying Switch Position & Corresponding Condition
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If continuity is not as specified, replace the switch.

Connect the switch connector and inspect the connector on wire harness side from the back side, as shown in Fig 5.

Fig 5: Key Illumination Switch Connector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002