Inspection Procedure
- INSPECT RADIO RECEIVER ASSY (B, ACC, E)
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Check that the continuity between terminals at each condition as shown in the chart.
Standard:
INSPECTION PROCEDURETester Connection Condition Specified Condition E - Body ground Constant Continuity - Check that the voltage between terminals at each condition as shown in the chart.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard:
INSPECTION PROCEDURETester Connection Condition Specified Condition B - E Constant 10 - 14 V ACC - E Ignition Switch ACC or ON 10 - 14 V
- NG: REPAIR OR REPLACE HARNESS OR CONNECTOR
- OK: CHECK AND REPLACE RADIO RECEIVER ASSY
- Check that the continuity between terminals at each condition as shown in the chart.