Proportioning Valve ASSY: Replacement

WARNING: This page is about a different car, the 2004 Toyota Matrix. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE PROPORTIONING VALVE ASSY
1. Using SST, disconnect the 5 brake tubes from the proportioning valve assy.
  SST 09023-00100
  
  Fig 1: Disconnecting 5 Brake Tubes From Proportioning Valve Assy
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 bolts and proportioning valve assy from the body.
  
  Fig 2: Removing Bolts And Proportioning Valve Assy From Body
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL PROPORTIONING VALVE ASSY
1. Install the proportioning valve assy with the 2 bolts.
  Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
  
  Fig 3: Installing Proportioning Valve Assy
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Using SST, connect the 5 brake tubes to the proportioning valve assy.
  SST 09023-00100
  
  Torque: 15.2 N.m (155 kgf.cm, 11 ft.lbf)
  
  Fig 4: Connecting Brake Tubes To Proportioning Valve Assy
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
FILL RESERVOIR WITH BRAKE FLUID
BLEED MASTER CYLINDER (See BRAKE FLUID )
SST 09023-00100
BLEED BRAKE LINE (See BRAKE FLUID )
CHECK FLUID LEVEL IN RESERVOIR