Front Seat: Installation

INSTALL FRONT SEAT 

CAUTION: Make sure that seat adjuster locks.
1. Slide the front seat to the most front position.
2. Without holding the seat track handle, mount the seat to the vehicle.
   NOTE:

   If holding the seat track handle, the adjusted most front positions slip off.

3. Connect the seat belt warning light connector.
4. w/ Side airbag:

   Connect the side airbag connector.

5. Tighten the bolts on the rear side temporarily, from the bolt on the inner side tighten them completely.

   Torque: 37 N.m (380 kgf.cm, 27 ft.lbf) 

6. Slide the seat to the most rear position to install the bolts on the front inner side.

   Torque: 37 N.m (380 kgf.cm, 27 ft.lbf) 

7. Install the seat track covers.