Wheel Alignment Specifications & Adjustment Procedures: Specifications
Use illustration for wheel alignment specifications. See Wheel Alignment Specifications (Prius) .
Wheel Alignment Specifications (Prius)
| Cold tire inflation pressure | Tire size: P175/65R14 84S | Front | 240 kPa (2.4 kgf/cm2 , 35 psi) | ||||
| Rear | 230 kPa (2.3 kgf/cm2 , 33 psi) | ||||||
| Front wheel alignment | Vehicle height | ||||||
| P175/65R14 | Front(1) | 191 mm (7.52 in.) | |||||
| Rear(2) | 239 mm (9.41 in.) | ||||||
| Camber | -0°26' ± 45' (-0.43° ± 0.75°) | ||||||
| Right-left error | 45' (0.75°) or less | ||||||
| Caster | 1°02' ± 45' (1.03° ± 0.75°) | ||||||
| Right-left error | 45' (0.75°) or less | ||||||
| Steering axis inclination | 9°52' ± 45' (9.87° ± 0.75°) | ||||||
| Right-left error | 45' (0.75°) or less | ||||||
| Toe-in (total) | 0°06' ± 12' (0.1° ± 0.2°, 1 ± 2 mm, 0.04 ± 0.08 in.) | ||||||
| Rack end length difference | 1.5 mm (0.059 in.) or less | ||||||
| Wheel angle | |||||||
| Inside wheel | 42°42' ± 2° (42.70° ± 2°) | ||||||
| Outside wheel: Reference | 35°54' (35.90°) | ||||||
| Rear wheel alignment | Camber | -1°30' ± 45' (-0.93° ± 0.75°) | |||||
| Right-left error | 45' (0.75°) or less | ||||||
| Toe-in (total) | 0°06' ± 20' (0.1° ± 0.33°) | ||||||
| 1 ± 3.0 mm (0.04 ± 0.12 in.) | |||||||
| Front axle | Axle bearing backlash | Maximum | 0.05 mm (0.0020 in.) | ||||
| Axle hub deviation | Maximum | 0.07 mm (0.0028 in.) | |||||
| Front drive shaft | Drive shaft standard length | LH | 579.9 ± 5.0 mm (22.831 ± 0.197 in.) | ||||
| RH | 836.9 ± 5.0 mm (32.949 ± 0.197 in.) | ||||||
| Front suspension | Lower suspension arm ball joint turning torque | 1.0 - 4.9 N.m (10 - 50 kgf.cm, 8.7 - 43 in..lbf) | |||||
| Stabilizer bar link ball joint turning torque | 0.05 - 1.0 N.m (0.5 - 10 kgf.cm, 0.4 - 8.7 in..lbf) | ||||||
| Rear axle | Axle bearing backlash | Maximum | 0.05 mm (0.0020 in.) | ||||
| Axle hub deviation | Maximum | 0.07 mm (0.0028 in.) | |||||
Measure the distance from the ground to the head center of the front side lower suspension arm mounting bolt.
Measure the distance from the ground to the center of the rear axle beam mounting bolt. |
|||||||