Inspection Procedure
WARNING: This page is about a different car, the 2004 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
- Check the power window switch (See
INSPECTION
)
- NG: Replace the power window switch.
- OK: Go to next step.
- Check wire harness and connector between power window switch and boby
- NG: Repair or replace wire harness or connector.
- OK: Go to next step.
- Check wire harness and connector between power window switch and body
- NG: Repair or replace wire harness or connector.
- OK: Go to next step.
Proceed to next circuit inspection shown on problem symptoms table (See PROBLEM SYMPTOMS TABLE ).