Back Window Glass: Installation

NOTE:

The window glass will be installed as shown in Fig 1.

Fig 1: Identifying Fix And Slide Type

INSTALL BACK WINDOW GLASS WITH WINDOW FRAME
1. Install the working cord to the frame, as shown in Fig 2.
  
  Fig 2: Installing Working Cord To Frame
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Apply soapy water to the contact surface of the body and the weatherstrip lip.
  
  Fig 3: Applying Soapy Water
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Hold the glass in position on the body.
4. Install the glass by pulling the cord from the room side, while pushing weatherstrip from the outside with your open hand.
  
  Fig 4: Installing Glass By Pulling Cord
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. To mark the glass fit in place, tap from the outside with your open hand.
INSPECT FOR LEAKS AND REPAIR
1. Conduct a leak test after the hardening time has elapsed.
2. Seal any leak with sealant.
  Part No. 08833-00030 or equivalent
INSTALL ROOF HEAD LINING (See page INSTALLATION (Regular Cab), INSTALLATION (Extra Cab) or INSTALLATION (Double Cab))