Notices When Checking

The wireless door lock remote control operates only when the following 3 conditions are satisfied.
1. All the doors are closed. However, doors can be unlocked even when any of the doors is opened.
2. The key is not inserted in the ignition key cylinder.
3. The power door lock system operates normally.
The wireless door lock remote control operational area varies with the situations.
1. The operational area varies with the operators or the ways to hold the transmitter.
2. The operational area may be narrowed down in some places due to the body configuration and the influence of the surrounding environment, or the remote control may not operate partially.
3. Because of using faint electric wave, in the case that there is a strong electric wave or noise in the frequency used area, the operational area may be narrowed down or the remote control may not be operated.
4. When the battery is consumed, the operational area is narrowed down or the remote control is not operated.
NOTE:
If the door control transmitter is left on a place exposed to direct sunlight, such as on the instrument panel, the battery may wear or a trouble may be caused.