LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Matrix Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 933 (Anti-Lock Brake System) >> Wheel Speed Sensor Rear >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Wheel Speed Sensor Rear: Removal

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Access and remove rear hub and bearing from vehicle. (Refer to SUSPENSION REAR ).
    CAUTION: Prior to removal, clean area around sensor head to help prevent contaminants from entering bearing when sensor head is removed.
  2. Remove screw fastening speed sensor head to hub and bearing (Figure ).
  3. Remove wheel speed sensor from hub and bearing.
scientia non olet · About LEMON Manuals