LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Matrix Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 950 (Power Seat System) >> Driver Seat Switch >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Driver Seat Switch: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the seat switch onto the door trim panel. Press into place ensuring all four clips are engaged.
  2. Reconnect the wire harness connector to the door module.
  3. Install the front door trim panel. Refer to TRIM PANEL .
  4. Reconnect the battery negative cable.
scientia non olet · About LEMON Manuals