LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Matrix Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 968 (Door System - Front) >> Check Strap >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Strap: Installation

WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position check strap on door through speaker hole (Figure ).
  2. Install nuts attaching check strap to door end frame. Tighten nuts to 11 N.m (90 in. lbs.) torque.
  3. Install door speaker, if equipped.
  4. Install front door watershield. (Refer to INSTALLATION  ).
  5. Install front door trim panel. (Refer to INSTALLATION  )
  6. Place check strap into position on A-pillar.
  7. Install screws attaching check strap to A-pillar (Figure ). Tighten screws to 12 N.m (105 in. lbs.) torque.
scientia non olet · About LEMON Manuals