Brake Line
WARNING: This page is about a different car, the 2002 Lexus IS 300. However, it is still accessible from the selected car via links, so may be relevant.
- Fill brake reservoir with appropriate brake fluid.
- Connect a vinyl tube to bleeder valve on brake caliper and place the other end in a clear jar.
- Depress brake pedal several times. Loosen bleeder valve with brake pedal held down.
- At the point when fluid flow stops, tighten the bleeder valve to specification. See TORQUE SPECIFICATIONS .
- Release brake pedal. Repeat steps 3 and 4 until all air in fluid has been bled out.
- Repeat procedure to bleed air out of brake line for each wheel.