Section 498 (Propeller Shaft): Replacement

WARNING: This page is about a different car, the 2004 Toyota RAV4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Be careful not to grip the propeller shaft tube too tightly in a vise this will cause deformation.

REPLACE DUST COVER

Using a screwdriver and hammer, remove the dust cover.

Fig 1: Removing Dust Cover
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Using SST and a hammer, tap in the new dust cover.
SST 09226-10010

Fig 2: Tapping In New Dust Cover
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

NOTE: Be careful not to damage the dust cover.