Engine Coolant Temp Sensor: Removal
WARNING: This page is about a different car, the 2004 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
HOT, PRESSURIZED COOLANT CAN CAUSE INJURY BY SCALDING. COOLING SYSTEM MUST BE PARTIALLY DRAINED BEFORE REMOVING THE COOLANT TEMPERATURE SENSOR.
- Drain cooling system below engine coolant temperature sensor level (Refer to STANDARD PROCEDURE - COOLING SYSTEM DRAINING ).
- Disconnect negative cable from remote jumper terminal (Figure )
- With the engine cold, disconnect coolant sensor electrical connector.
- Remove sensor.