Wheel Alignment Specifications & Adjustment Procedures: Specifications
Front Wheel Alignment Specifications
| Front wheel alignment | Vehicle height | ||
| A-B: | 95 mm (3.74 in.) | ||
| D-C: | 62 mm (2.40 in.) | ||
| Toe-in (total) | 0° ± 12' (0° ± 0.2°), 0 ± 2 mm (0 ± 0.08 in.) | ||
| Rack end length difference | 1.5 mm (0.059 in.) or less | ||
| Wheel angle | |||
| Inside wheel | 40°35' (38°35' - 42°35') 40.58° (38.58° - 42.58°) |
||
| Outside wheel: Reference | 34°15' 34.25° |
||
| Camber | -0°35' ± 45' (-0.58° ± 0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Caster | 3°10' ± 45' (3.17° ± 0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Steering axis inclination | 12°35' ± 45' (12.58° ± 0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Front suspension | Lower ball joint turning torque | 0.98 to 4.90 N.m (10 to 50 kgf.cm, 9 to 43 in..lbf) | |
| Front suspension | Stabilizer link turning torque | 0.05 to 1.96 N.m (0.5 to 20 kgf.cm, 0.4 to 17.4 in..lbf) | |
| A: Ground clearance of front wheel center B: Ground clearance of lower arm No.1 set bolt center C: Ground clearance of rear axle carrier bush set bolt center D: Ground clearance of rear wheel center |
|||
Rear Wheel Alignment Specifications
| Rear wheel alignment | Toe-in (total) | 0°18' ± 15' (0.30° ± 0.25°, 3.0 ± 2.5 mm 0.12 ± 0.10 in.) | |
| Camber | -1°30' ± 30' (-1.50° ± (0.5°) | ||
| Right-left error | 30' (0.5°) or less |