Torque Specification
CHARGING SYSTEM TORQUE SPECIFICATIONS
| Part tightened | N.m | kgf.cm | ft.lbf | |
|---|---|---|---|---|
| Bearing retainer x Drive end frame | 12 V 90 A | 3.0 | 31 | 27 in..lbf |
| 12 V 100 A | 2.3 | 23 | 20 in..lbf | |
| Rectifier end frame x Drive end frame (12 V 90 A) | for nut A | 4.5 | 46 | 40 in..lbf |
| for nut B | 5.4 | 55 | 48 in..lbf | |
| Rectifier end frame x Drive end frame | 12 V 100 A | 5.8 | 59 | 51 in..lbf |
| Cord clip x Drive end frame | 12 V 100 A | 4.5 | 46 | 410 in..lbf |
| Generator pulley x Rotor | 111 | 1,132 | 82 | |
| Voltage regulator x Rectifier end frame | 12 V 90 A | 2.0 | 20 | 18 in..lbf |
| Rear end cover x Rectifier holder | 12 V 90 A | 4.4 | 45 | 39 in..lbf |
| Rear end cover x Drive end Frame (Stator) | 12 V 100 A | 4.6 | 47 | 41 in..lbf |
| Brush holder x Drive end Frame (Stator) | 1.8 | 18 | 16 in..lbf | |
| plate terminal x Rectifier holder | 12 V 90 A | 3.9 | 40 | 35 in..lbf |
| Terminal insulator x Rectifier holder | 12 V 90 A | 4.1 | 42 | 36 in..lbf |
| Generator x Engine | for bolt A | 52 | 530 | 38 |
| for bolt B | 21 | 214 | 15 | |
| Generator wire x Generator | 9.8 | 100 | 87 in..lbf | |
| Wire clip x Generator | 7.7 | 79 | 68 in..lbf | |
| Generator wire x Generator | 9.8 | 100 | 87 in..lbf | |