LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2004 >> Tacoma S-Runner >> Repair and Diagnosis >> Body & Frame >> Body, Cab Control Systems >> Body Control Systems - Diagnostics >> Circuit Inspection >> Door Lock Control Switch Circuit >> Inspection Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Procedure

  1. Check Door Lock Control Switch. See  CHECK DOOR LOCK CONTROL SWITCH  . 
    1. NG: Replace door lock control switch. 
    2. OK: Go to next step. 
  2. Check wire harness and connector between door lock control switch and body ECU. See  HOW TO USE THE DIAGNOSTIC CHART AND INSPECTION PROCEDURE  . 
    1. NG: Repair or replace harness or connector. 
    2. OK: Go to next step. 
  3. Check harness and connector between door lock control switch and power window master switch. 
    1. NG: Repair or replace harness or connector. 
    2. OK: Proceed to next circuit inspection shown in  PROBLEM SYMPTOMS TABLE  . 
scientia non olet · About LEMON Manuals