Power Mirror Control System: Inspection

1. L side of left/right adjustment switch:

   Inspect the mirror switch continuity.

   Standard (Left side): 

   Fig 1: Outer Mirror Switch Chart (Left Side)

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   If the result is not as specified, replace the switch assy.

2. R side of left/right adjustment switch:

   Inspect the mirror switch continuity.

   Standard (Right side): 

Fig 2: Outer Mirror Switch Chart (Right Side)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If the result is not as specified, replace the switch assy.

Fig 3: Inspecting Outer Mirror Switch Assy

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Disconnect the mirror connector.
2. Apply battery voltage and inspect operation of the mirror face, as shown in Fig 4 and Fig 5 .
   Fig 4: Applying Battery Voltage And Inspecting Operation Of Mirror Face

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard (LH): 

Fig 5: Outer Rear View Mirror LH Chart

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If the result is not as specified, replace the mirror assy.

1. Disconnect the mirror connector.
2. Apply battery voltage and inspect operation of the mirror face, as shown in Fig 6 and Fig 7 .
   Fig 6: Inspecting Outer Rear View Mirror Assy RH

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

Standard (RH): 

Fig 7: Outer Rear View Mirror RH Chart

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If the result is not as specified, replace the mirror assy.