Cruise Control Main Switch ASSY: Replacement

HINT:

Installation is in the reverse order of removal.

1. DISCONNECT BATTERY NEGATIVE TERMINAL (SEE  SUPPLEMENTAL RESTRAINT SYSTEM  ) 
2. REMOVE STEERING WHEEL COVER LOWER NO. 2 
3. REMOVE STEERING WHEEL COVER LOWER NO. 3 
4. REMOVE HORN BUTTON ASSY (SEE  REPLACEMENT  ) 
5. REMOVE CRUISE CONTROL MAIN SWITCH ASSY 
   1. Disconnect the connector.
   2. Remove the 2 screws.
      Fig 1: Removing 2 Screws

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   3. Pull out the cruise control main switch assy in the direction shown by the arrow in the illustration.
      Fig 2: Identifying Cruise Control Main Switch Assy

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
6. INSTALL HORN BUTTON ASSY (SEE  REPLACEMENT  ) 
7. INSPECT HORN BUTTON ASSY (SEE  ON-VEHICLE INSPECTION  ) 
8. CONNECT BATTERY NEGATIVE TERMINAL 
9. INSPECT SRS WARNING LIGHT (SEE  DIAGNOSIS SYSTEM  )