LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2005 >> Camry Base, Standard >> Repair and Diagnosis >> Body & Frame >> Windows >> Windshield/WINDOWGLASS/Mirror >> Power Mirror Control System >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Mirror Control System: Inspection

Fig 1: Inspecting Outer Mirror Switch Assy
G02595344Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  1. INSPECT OUTER MIRROR SWITCH ASSY
    1. Inspect the mirror switch continuity.
    1. Left side for left/right adjustment switch:

      Inspect the left side mirror switch continuity.

      Standard: 

      CONTINUITY SPECIFICATION

      Terminal No. Switch position Specified condition
        OFF No continuity
      4 - 8 6 - 7 UP Continuity
      4 - 7 6 - 8 DOWN Continuity
      5 - 8 6 - 7 LEFT Continuity
      5 - 7 6 - 8 RIGHT Continuity

      If the continuity is not as specified, replace the switch.

    2. Right side for left/right adjustment switch:

      Inspect the right side mirror switch continuity.

      Standard: 

      CONTINUITY SPECIFICATION

      Terminal No. Switch position Specified condition
        OFF No continuity
      3 - 8 6 - 7 UP Continuity
      3 - 7 6 - 8 DOWN Continuity
      2 - 8 6 - 7 LEFT Continuity
      2 - 7 6 - 8 RIGHT Continuity

      If the continuity is not as specified, replace the switch.

  2. INSPECT OUTER REAR VIEW MIRROR ASSY LH (W/O OUTER MIRROR HEATER)
    1. Inspect the mirror motor operation.

      Standard (TMC Made): 

      MIRROR OPERATION REFERENCE

      Battery connection Mirror position
      Positive (+) - 1 Negative (-) - 2 Turn upward
      Positive (+) - 2 Negative (-) - 1 Turn downward
      Positive (+) -3 Negative (-) - 2 Turn left
      Positive (+) -2 Negative (-) -3 Turn right

      Standard (TMMK Made): 

      MIRROR OPERATION REFERENCE

      Battery connection Mirror position
      Positive (+) - 6 Negative (-) - 2 Turn upward
      Positive (+) - 2 Negative (-) - 6 Turn downward
      Positive (+) - 3 Negative (-) - 2 Turn left
      Positive (+) - 2 Negative (-) - 3 Turn right

      If the continuity is not as specified, replace the outer rear view mirror assy LH.

      Fig 2: Inspecting Outer Rear View Mirror Assy LH (W/O Outer Mirror Heater)
      G02595345Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSPECT OUTER REAR VIEW MIRROR ASSY RH (W/O OUTER MIRROR HEATER)
    1. Inspect the mirror motor operation.

      Standard (TMC Made): 

      MIRROR OPERATION REFERENCE

      Battery connection Mirror position Negative
      Positive (+) - 1 Negative (-) - 2 Turn upward
      Positive (+) - 2 Negative (-) - 1 Turn downward
      Positive (+) - 3 Negative (-) - 2 Turn left
      Positive (+) - 2 Negative (-) - 3 Turn right

      Standard (TMMK Made): 

      MIRROR OPERATION REFERENCE

      Battery connection Mirror position Negative
      Positive (+) - 6 Negative (-) - 2 Turn upward
      Positive (+) - 2 Negative (-) - 6 Turn downward
      Positive (+) - 3 Negative (-) - 2 Turn left
      Positive (+) - 2 Negative (-) - 3 Turn right

      If the continuity is not as specified, replace the outer rear view mirror assy RH.

      Fig 3: Inspecting Outer Rear View Mirror Assy RH (W/O Outer Mirror Heater)
      G02595346Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSPECT OUTER REAR VIEW MIRROR ASSY LH (W/OUTER MIRROR HEATER, TWC MADE)
    1. Inspect the mirror heater operation.

      Standard: 

      MIRROR OPERATION REFERENCE

      Battery connection Mirror position Negative
      Positive (+) - 2 Negative (-) - 3 Turn upward
      Positive (+) - 3 Negative (-) - 2 Turn downward
      Positive (+) - 4 Negative (-) - 3 Turn left
      Positive (+) - 3 Negative (-) - 4 Turn right

      If the continuity is not as specified, replace the outer rear view mirror assy LH.

    2. check the mirror heater operation.
      1. Check the resistance between terminals 1 and 5 of the connector.

        Resistance: 4.0 - 5.4 Ω

      2. Check that the mirror is heated up when connecting the battery positive (+) to terminal 4 and the battery negative (-) to terminal 5 of the connector.
      Fig 4: Inspecting Outer Rear View Mirror Assy LH (W/Outer Mirror Heater, TWC Made)
      G02595347Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSPECT OUTER REAR VIEW MIRROR ASSY LH (W/OUTER MIRROR HEATER, TMMK M ADE)
    1. Inspect the mirror motor operation.

      Standard: 

      MIRROR OPERATION REFERENCE

      Battery connection Mirror position Negative
      Positive (+) - 6 Negative (-) - 2 Turn upward
      Positive (+) - 2 Negative (-) - 6 Turn downward
      Positive (+) - 3 Negative (-) - 2 Turn left
      Positive (+) - 2 Negative (-) - 3 Turn right

      If the continuity is not as specified, replace the outer rear view mirror assy LH.

    2. Inspect the mirror heater operation.
      1. Check the resistance between terminals 1 and 4 of the connector.

        Resistance: 4.0 - 5.4 Ω

      2. Check that the mirror is heated up when connecting the battery positive (+) to terminal 4 and the battery negative (-) to terminal 5 of the connector.
      Fig 5: Inspecting Outer Rear View Mirror Assy LH (W/Outer Mirror Heater, TMMK MADE)
      G02595348Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. INSPECT OUTER REAR VIEW MIRROR ASSY RH (W/OUTER MIRROR HEATER, TMC MADE)
    1. Inspect the mirror motor operation.

      Standard: 

      MIRROR OPERATION REFERENCE

      Battery connection Mirror position Negative
      Positive (+) - 2 Negative (-) - 3 Turn upward
      Positive (+) - 3 Negative (-) - 2 Turn downward
      Positive (+) - 4 Negative (-) - 3 Turn left
      Positive (+) - 3 Negative (-) - 4 Turn right

      If the continuity is not as specified, replace the outer rear view mirror assy RH.

    2. Check the mirror heater operation.
      1. Check the resistance between terminals 1 and 5 of the connector.

        Resistance: 4.0 - 5.4 Ω

      2. Check that the mirror is heated up when connecting the battery positive (+) to terminal 4 and the battery negative (-) to terminal 5 of the connector.
      Fig 6: Inspecting Outer Rear View Mirror Assy RH (W/Outer Mirror Heater, TMC Made)
      G02595349Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. INSPECT OUTER REAR VIEW MIRROR ASSY RH (W/OUTER MIRROR HEATER, TMMK MADE)
    1. Inspect the mirror motor operation.
      MIRROR OPERATION REFERENCE

      Battery connection Mirror position Negative
      Positive (+) - 6 Negative (-) - 2 Turn upward
      Positive (+) - 2 Negative (-) - 6 Turn downward
      Positive (+) - 3 Negative (-) - 2 Turn left
      Positive (+) - 2 Negative (-) - 3 Turn right

      If the continuity is not as specified, replace the outer rear view mirror assy RH.

    2. Check the mirror heater operation
      1. Check the resistance between terminals 1 and 4 of the connector.

        Resistance: 4.0 - 5.4 Ω

      2. Check that the mirror is heated up when connecting the battery positive (+) to terminal 4 and the battery negative (-) to terminal 5 of the connector.
        Fig 7: Inspecting Outer Rear View Mirror Assy RH (W/Outer Mirror Heater, TMMK Made)
        G02595350Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals