Service Data
Wheel Alignment Specifications (Front)
| Front wheel alignment | Vehicle height | ||
| 1ZZ-FE USA, Canada | Front: A - B: | 87 mm (3.43 in.) | |
| Rear: D - C: | 43 mm (1.69 in.) | ||
| 1ZZ-FE Mexico | Front: A - B: | 72 mm (2.84 in.) | |
| Rear: D - C: | 29 mm (1.14 in.) | ||
| 2ZZ-GE | Front: A - B: | 97 mm (3.81 in.) | |
| Rear: D-C: | 57 mm (2.24 in.) | ||
| Toe-in (total) | 0° ± 12'(0° ± 0.2°, 0 ± 2 mm, 0 ± 0.08 in.) | ||
| Wheel angle | |||
| 1ZZ-FE USA, Canada | Inside wheel: | 37°06' ± 2° (37.10° ± 2°) | |
| Outside wheel: Reference: | 31° 49' (31.82°) | ||
| 1ZZ-FE Mexico | Inside wheel: | 37°16' ± 2° (37.27° ± 2°) | |
| Outside wheel: Reference: | 32°08' (32.13°) | ||
| 2ZZ-GE | Inside wheel: | 37°00' ± 2° (37.00° ± 2°) | |
| Outside wheel: Reference: | 31°38'(31.63°) | ||
| Camber | 1ZZ-FE USE, Canada: | -0°32' ± 45' (-0.53° ± 0.75°) | |
| 1ZZ-FE Mexico: | -0°22' ± 45' (-0.37° ± 0.75°) | ||
| 2ZZ-GE: | -0°38' ± 45' (-0.63° ± 0.75°) | ||
| Right-left error: | 45'(0.75°) or less | ||
| Caster | |||
| 1ZZ-FE USE, Canada: | 2°50' ± 45' (2.83° ± 0.75°) | ||
| 1ZZ-FE Mexico: | 2° 43' ± 45' (2.72° ± 0.75°) | ||
| 2ZZ-GE: | 3°05' ± 45' (3.08° ± 0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Steering axis inclination | |||
| 1ZZ-FE USE, Canada: | 11°21' ± 45' (11.35° ± 0.75°) | ||
| 1ZZ-FE Mexico: | 10°59' ± 45' (10.98° ± 0.75°) | ||
| 2ZZ-GE: | 11°34' ± 45' (11.57° ± 0.75°) | ||
| Right-left error | 45' (0.75°) or less | ||
| Front suspension | Lower ball joint turning torque | 0.98 -- 3.43 N.m (10 -- 35 kgf.cm, 8.7 -- 30 in..lbf) | |
| Stabilizer bar link ball joint turning torque | 0.05 -- 1.96 N.m (0.5 -- 20 kgf.cm, 0.4 -- 17.4 in..lbf) | ||
| *1
: Ground clearance of front wheel center *2 : Ground clearance of lower suspension arm front bolt center *3 : Ground clearance of rear wheel center *4 : Ground clearance of axle beam set bolt center |
|||
*1: Ground clearance of front wheel center
*2: Ground clearance of lower suspension arm front bolt center
*3: Ground clearance of rear wheel center
*4: Ground clearance of axle beam set bolt center