Cruise Control Main Switch: Installation
- INSTALL CRUISE CONTROL MAIN SWITCH
- Install the cruise control main switch assembly with the 2 screws.
Torque: 2.35 N*m (24 kgf*cm, 21 in.*lbf)
- Connect the connector.
- Install the cruise control main switch assembly with the 2 screws.
- INSTALL STEERING PAD (See INSTALLATION )
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- PERFORM INITIALIZATION NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal (See INITIALIZATION ).
- INSPECT STEERING PAD (See INSTALLATION )
- INSPECT SRS WARNING LIGHT
(See CHECK MODE PROCEDURE )