Torque Specifications
WARNING: This page is about a different car, the 2006 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.
V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1
V (COOLER COMPRESSOR TO CRANKSHAFT PULLEY) BELT NO.1 TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Generator installation bolt | Bolt A | 58 | 591 | 13 |
| Bolt B | 18 | 183 | 43 | |
AIR CONDITIONING RADIATOR ASSEMBLY
AIR CONDITIONING RADIATOR ASSEMBLY TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Air conditioning tube assembly at Cooler evaporator sub-assembly No.1 | 3.5 | 35 | 30 in.*lbf |
| Air conditioning radiator assembly at Body | 1.5 | 15 | 12 in.*lbf |
| Air conditioning radiator assembly at Instrument panel brace sub-assembly No.1 | 9.8 | 100 | 87 in.*lbf |
BLOWER ASSEMBLY
BLOWER ASSEMBLY TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Blower assembly at Body | 1.5 | 15 | 12 in.*lbf | |
| Instrument panel brace sub-assembly No.1 at Instrument panel reinforcement | Screw | 9.8 | 100 | 87 in.*lbf |
COOLER COMPRESSOR ASSEMBLY (2AZ-FE)
COOLER COMPRESSOR ASSEMBLY (2AZ-FE) TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Magnet clutch hub at Cooler compressor assembly | 18 | 184 | 13 |
| Compressor and magnet clutch at Engine | 25 | 250 | 18 |
| Cooler refrigerant suction hose No.1 at Compressor and magnet clutch | 9.8 | 100 | 87 in.*lbf |
| Cooler refrigerant discharge hose No.1 at Compressor and magnet clutch | 9.8 | 100 | 87 in.*lbf |
COOLER COMPRESSOR ASSEMBLY (3MZ-FE)
COOLER COMPRESSOR ASSEMBLY (3MZ-FE) TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Magnet clutch hub at Cooler compressor assembly | 18 | 184 | 13 |
| Compressor and magnet clutch at Engine | 25 | 250 | 18 |
| Cooler refrigerant suction hose No.1 at Compressor and magnet clutch | 9.8 | 100 | 87 in.*lbf |
| Cooler refrigerant discharge hose No.1 at Compressor and magnet clutch | 9.8 | 100 | 87 in.*lbf |
COOLER CONDENSER ASSEMBLY
COOLER CONDENSER ASSEMBLY TORQUE SPECIFICATIONS
| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Cooler condenser assembly at Body | 9.8 | 100 | 85 in.*lbf |
| Cooler refrigerant liquid pipe A at Cooler condenser assembly | 5.4 | 55 | 47 in.*lbf |
| Cooler refrigerant discharge hose No.1 at Cooler condenser assembly | 5.4 | 55 | 47 in.*lbf |