LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2006 >> Avalon XLS >> Repair and Diagnosis >> External Pages >> Different car >> Section 38 (Cruise Control System) >> Cruise Control System >> Road Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Road Test

WARNING: This page is about a different car, the 2006 Toyota Camry Solara. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

'SET' and '-', 'RES' and '+', 'ON-OFF' functions share the same switch. Operate the cruise control main switch according to the directions (triangles, etc.) indicated on the switch.

  1. INSPECT 'SET' FUNCTION 
    1. Push the ON-OFF button on.
    2. Drive at a desired speed of 40 km/h (25 mph) or higher.
    3. Push down the control switch lever to "-/SET".
    4. After releasing the lever, check that the vehicle cruises at the set speed.
    5. Fig 1: Inspecting 'SET' Function
      G04387161Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT '+' FUNCTION 
    1. Push the ON-OFF button on.
    2. Drive at a desired speed of 40 km/h (25 mph) or higher.
    3. Push down the control switch lever to "-/SET".
    4. Check that vehicle speed increases while the control switch lever is pushed up to "+/RES".
    5. Check that the vehicle cruises at the newly set speed when the switch is released.
    6. Momentarily (approximately 0.6 second) push up the control switch lever to the "+/RES", and then release it. Check that vehicle speed increases approximately 1.6 km/h (1 mph) with each lever operation (Tap-up function).
    7. Fig 2: Inspecting '+' Function
      G04387162Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSPECT '-' FUNCTION 
    1. Push the ON-OFF button on.
    2. Drive at a desired speed of 40 km/h (25 mph) or higher.
    3. Push down the control switch lever to "-/SET".
    4. Check that vehicle speed decreases while the control switch lever is pushed down to "-/SET".
    5. Check that the vehicle cruises at the newly set speed when the switch is released.
    6. Momentarily (approximately 0.6 second) push down the control switch to "-/SET", and then release it. Check that vehicle speed decreases approximately 1.6 km/h (1 mph) with each lever operation (Tapdown function).

      HINT:

      Cruise control system automatically cancels when the vehicle speed goes below 40 km/h (25 mph).

    7. Fig 3: Inspecting '-' Function
      G04387163Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSPECT 'CANCEL' FUNCTION 
    1. Push the ON-OFF button on.
    2. Drive at a desired speed of 40 km/h (25 mph) or higher.
    3. Push down the control switch lever to "-/SET".
    4. Check that the system cancels cruise control when operating one of the following:
      1. Depressing the brake pedal
      2. Depressing the clutch pedal (M/T)
      3. Shifting into any position except D and 3 while driving (A/T: 2AZ-FE)
      4. Shifting into any position except D and S while driving (A/T: 3MZ-FE)
      5. Pushing the cruise control main switch ON-OFF button off
      6. Pulling the cruise control switch lever to "CANCEL"
    5. Fig 4: Inspecting 'CANCEL' Function
      G04387164Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSPECT 'RES' FUNCTION 
    1. Push the ON-OFF button on.
    2. Drive at a desired speed of 40 km/h (25 mph) or higher.
    3. Push down the control switch lever to "-/SET".
      1. After cancelling the cruise control according to any of the above operations except (5), push up the switch lever to "+/RES" at a speed of 40 km/h (25 mph) or higher.
      2. Check that the vehicle resumes the previously set speed.

        HINT:

        'RES' function does not resume the set speed when vehicle speed goes below 40 km/h (25 mph).

    4. Fig 5: Inspecting 'RES' Function
      G04387165Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002