LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2006 >> Camry Solara SLE, 2D Convertible >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (3MZ-FE) >> Throttle Body >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Throttle Body: Installation

  1. INSTALL THROTTLE BODY ASSEMBLY 
    1. Install a new gasket to the intake air connector.
    2. Install the throttle body with the 2 bolts and 2 nuts.

      Torque: 11 N*m (112 kgf*cm, 8 ft.*lbf) 

    3. Connect the water by-pass hose No. 3.
    4. Connect the water by-pass hose No. 2.
    5. Connect the throttle control motor & throttle position sensor connector.
  2. INSTALL INTAKE AIR RESONATOR 
  3. INSTALL AIR CLEANER ASSEMBLY (See  INSTALLATION  ) 
  4. INSTALL AIR CLEANER INLET ASSEMBLY 
  5. CHECK CONNECTION OF VACUUM HOSE 
  6. ADD ENGINE COOLANT (See  COOLANT  ) 
  7. CHECK FOR ENGINE COOLANT LEAKS 
  8. INSTALL V-BANK COVER SUB-ASSEMBLY 
    1. Fit the 2 retainers and install the V-bank cover.
    2. Using a 5 mm socket hexagon wrench 5, tighten the 3 nuts.

      Torque: 7.9 N*m (81 kgf*cm, 70 in.*lbf) 

  9. INSTALL FRONT SUSPENSION UPPER BRACE CENTER 
    1. Install the upper brace with the 2 nuts.

      Torque: 80 N*m (815 kgf*cm, 59 ft.*lbf) 

scientia non olet · About LEMON Manuals