How To Proceed With Troubleshooting

HINT:

• Troubleshooting of the wireless door lock control system is based on the premise that the power door lock system is operating normally. Therefore, before troubleshooting the wireless door lock control system, first make certain that the power door lock system is operating normally.
• Use these procedures to troubleshoot the wireless door lock control system.

1. VEHICLE BROUGHT TO WORKSHOP 
2. CUSTOMER PROBLEM ANALYSIS CHECK AND SYMPTOM CHECK 
   1. Interview the customer to confirm the trouble (See HOW TO PROCEED WITH TROUBLESHOOTING )
3. PROBLEM SYMPTOMS TABLE 
   1. If the fault is not listed on the problem symptoms table, proceed to A.
   2. If the fault is listed on the problem symptoms table, proceed to B.

   B: Go to step  5

   A: GO TO NEXT STEP 

4. OVERALL ANALYSIS AND TROUBLESHOOTING 
   1. TERMINALS OF ECU  .
   2. OPERATION CHECK  .
5. ADJUST, REPAIR OR REPLACE 
6. CONFIRMATION TEST 

   END