Deceleration Sensor: Installation

1. Install the 2 bolts and deceleration sensor to the body, then connect the deceleration sensor connector to the deceleration sensor.

   Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

   NOTE:

   • Do not use the dropped or damage sensor.
   • Free from the foreign matters or floor carpet between the deceleration sensor bracket and body.
     Fig 1: Installing Deceleration Sensor

     Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the bolt and upper side deceleration sensor bracket.

   Torque: 21 N*m (214 kgf*cm, 15 ft.*lbf) 

Fig 2: Installing Yaw Rate Sensor Bracket

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

See TEST MODE PROCEDURE