LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2006 >> RAV4 Base, 3.5 K, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control System (2GR-FE) >> Crankshaft Position Sensor >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Crankshaft Position Sensor: Inspection

  1. INSPECT CRANKSHAFT POSITION SENSOR 
    1. Measure the resistance between the terminals.

      Standard resistance 

      CONNECTOR TERMINALS RESISTANCE REFERENCE AND CONDITION

      Temperature Specified Condition
      Cold 1,630 to 2,740 Ω
      Hot 2,065 to 3,225 Ω
      Fig 1: Identifying Crankshaft Position Sensor Connector Terminals
      G04484545Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      NOTE: In the table above, the terms "Cold" and "Hot" refer to the temperature of the coils:
      - "Cold" means approximately -10 to 50°C (14 to 122°F).
      - "Hot" means approximately 50 to 100°C (122 to 212°F).

      If the resistance is not as specified, replace the sensor.

scientia non olet · About LEMON Manuals