LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2006 >> Sienna LE, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System >> Cruise Control System >> Road Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Road Test

  1. PROBLEM SYMPTOM CONFIRMATION 
    1. Inspect the SET switch.
      1. Push the main switch button ON.
      2. Drive at a desired speed (40 km/h (25 mph) or higher).
      3. Push down the control switch to the -/SET position.
      4. After releasing the switch, check that the vehicle cruises at the desired speed.
        Fig 1: Inspecting SET Switch
        G04494739Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Inspect the '+' switch.
      1. Push the main switch button ON.
      2. Drive at a desired speed (40 km/h (25 mph) or higher).
      3. Check that the vehicle speed increases when the control switch is pushed up to +/RES, and that the vehicle cruises at the set speed when the switch is released.
      4. Push the control switch to +/RES, and then immediately release it. Check that the vehicle speed increases by about 1.6 km/h (Tap-up function).
        Fig 2: Inspecting '+' Switch
        G04494740Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Inspect the '-' switch.
      1. Push the main switch button ON.
      2. Drive at a desired speed (40 km/h (25 mph) or higher).
      3. Check that the vehicle speed decreases while the control switch is pushed down to -/SET, and the vehicle cruises at the set speed when the switch is released.
      4. Push the control switch to -/SET, and then immediately release it. Check that the vehicle speed decreases by about 1.6 km/h (Tap-down function).
        Fig 3: Inspecting '-' Switch
        G04494741Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Inspect the CANCEL switch.
      1. Push the main switch button ON.
      2. Drive at a desired speed (40 km/h (25 mph) or higher).
      3. After doing one of the following, check that the cruise control system is cancelled and that the normal driving mode is reset.
        • Depressing the brake pedal.
        • Shift to any gear besides D.
        • Pushing the main switch button OFF.
        • Pulling the control switch CANCEL.
          Fig 4: Inspecting CANCEL Switch
          G04494742Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Inspect the RES switch.
      1. Push the main switch button ON.
      2. Drive at a desired speed (40 km/h (25 mph) or higher).
      3. After doing one of the following, check that the cruise control system is cancelled and that the normal driving mode is reset.
        • Depressing the brake pedal.
        • Shift to any gear besides D.
        • Pulling the control switch CANCEL.
      4. After the control switch is pulled up to +/RES at the driving speed of more than 40 km/h (25 mph), check that the vehicle resumes the same speed maintained before the cancellation.
        Fig 5: Inspecting RES Switch
        G04494743Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals