Shift Lever Assembly: Installation

INSTALL FLOOR SHIFT ASSEMBLY
1. Install the floor shift assembly with the 4 bolts.
  Torque: 12 N*m (122 kgf*cm, 9 ft.*lbf)
  
  Fig 1: Identifying Floor Shift Assembly Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the transmission control cable with the lock plate.
3. Connect the 2 clamps and 2 connectors.
ADJUST SHIFT LEVER POSITION
HINT:

(See ADJUSTMENT )
INSTALL REAR CONSOLE BOX ASSEMBLY
INSTALL NO.2 CONSOLE UPPER PANEL GARNISH
INSTALL NO.1 CONSOLE UPPER PANEL GARNISH
INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
INSTALL CONSOLE UPPER REAR PANEL SUB-ASSEMBLY
INSPECT SHIFT LEVER POSITION
HINT:

(See ADJUSTMENT )