Inspection Procedure
- CHECK OPERATION
- Press the CD EJECT switch of the radio receiver for 2 seconds or more and check that the CD is ejected.
OK:
CD is ejected.
NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK: Go to Next Step
- Press the CD EJECT switch of the radio receiver for 2 seconds or more and check that the CD is ejected.
- REPLACE CD
- Insert another CD and check if it is ejected.
OK:
CD is ejected.
NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK: CD IS FAULTY
- Insert another CD and check if it is ejected.