Window Defogger Wire: Repair

HINT:

If necessary, repair the defogger wire.

1. Clean the broken wire tips with grease, wax and silicone remover.
2. Place 2 pieces of masking tape along both sides of the wire.
3. Thoroughly mix the repair agent (DuPont paste No. 4817 of equivalent).
   Fig 1: Placing Pieces Of Masking Tape Along Both Sides Of Wire

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Using a fine tip brush, apply a small amount of the agent to the wire.
5. After a few minutes, remove the masking tape.
   NOTE: Do not touch the repaired part on the wire for at least 24 hours, until the repair agent is completely fixed.

Fig 2: Applying Agent To Wire

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002