Data List / Active Test
- DATA LIST
HINT:
Using the intelligent tester's Data List allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.
- Connect the intelligent tester to the DLC3.
- Turn the engine switch on (IG).
- Read the Data List according to the display on the tester.
PWR SOURCE CTRL (Power source control)
DATA LISTItem Measurement Item / Range (Display) Normal Condition Diagnostic Note SHIFT P SIG Status of shift P position switch / ON or OFF ON: Shift Lever is P position
OFF: Shift lever is non-P position- STR UNLOCK SW Status of steering unlock switch / ON or OFF ON: Steering unlock switch is UNLOCK
OFF: Steering unlock switch is LOCK- STOP LAMP SW1 Status of stop light switch1 / ON or OFF ON: Brake pedal pressed
OFF: Brake pedal depressed- START SW1 Status of start switch1 / ON or OFF ON: Engine switch is ON (IG)
OFF: Engine switch is OFF- START SW2 Status of start switch2 / ON or OFF ON: Engine switch is ON (IG)
OFF: Engine switch is OFF- N SW / C SW Status of Neutral SW / ON or OFF ON: Shift Lever is N position
OFF: Shift lever is non-N position- RATCH CIRCUIT Status of ratch circuit / ON or OFF ON: Engine switch is ON (IG)
OFF: Engine switch is OFF or ON (ACC) or ON (START)- IG1 RELAY MON1 Status of IG1 relay monitor (outside) / ON or OFF ON: Engine switch is ON (IG)
OFF: Engine switch is OFF- IG1 RELAY MON2 Status of IG1 relay monitor (inside) / ON or OFF ON: Engine switch is ON (IG)
OFF: Engine switch is OFF- IG2 RELAY MON1 Status of IG2 relay monitor (outside) / ON or OFF ON: Engine switch is ON (IG)
OFF: Engine switch is OFF- IG2 RELAY MON2 Status of IG2 relay monitor (inside) / ON or OFF ON: Engine switch is ON (IG)
OFF: Engine switch is OFF- ST RELAY MON Status of starter relay monitor / ON or OFF ON: ST relay is ON
OFF: ST relay is OFF- ST REQUEST SIG Status of starter requesting signal monitor / ON or OFF ON: ST relay is ON
OFF: ST relay is OFF- ACC RELAY MON Status of ACC relay monitor / ON or OFF ON: Engine switch is ON (ACC)
OFF: Engine switch is OFF- ACC CUT SIG Status of ACC relay cut signal / ON or OFF ON: Engine switch is OFF
OFF: Engine switch is ON (ACC)- VEHICLE SPD SIG Status of vehicle speed signal / STOP or RUN ON: Vehicle is stopped
OFF: Vehicle is running- E / G COND Status of engine condition / STOP or RUN ON: Engine is stopped
OFF: Engine is runningWhen engine condition is rotating PWR COND Status of power supply condition / ALL, ACC ON, IG1, IG2, ST ON ALL: All relay is ON
ACC ON: ACC relay is ON
IG1: IG1 relay is ON
IG2: IG2 relay is ON
ST ON: ST relay is ONWhen ready signal allows to be capable driving #CODE Status of Number of diagnosis codes / min: 0, max: 255 - -
- ACTIVE TEST
HINT:
Performing the intelligent tester's Active Test allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the Active Test early in troubleshooting is one way to save time. The Data List can be displayed during the Active Test.
- Connect the intelligent tester to the DLC3.
- Turn the engine switch on (IG).
- Perform the Active Test according to the display on the tester.
PWR SOURCE CTRL (Power source control)
DATA LISTItem Test Details Diagnostic Note LIGHTING IND Indicator for lighting ON / OFF - IND CONDITION Indicator for lighting Green / Amber / No Sig - STR LOCK PWR Power supply for steering lock ON / OFF -