Diagnostic Trouble Code Chart
- DTC CHECK
If a malfunction code is displayed during the DTC check, the suspected area listed for that code in the table below, and proceed to the relevant test.
ENTRY AND START SYSTEM
DIAGNOSTIC TROUBLE CODE CHART
| DTC No. | Detection Item | Trouble Area |
|---|---|---|
| B2271 | Ignition Hold Monitor Malfunction |
|
| B2272 | Ignition 1 Monitor Malfunction |
|
| B2273 | Ignition 2 Monitor Malfunction |
|
| B2274 | ACC Monitor Malfunction |
|
| B2275 | STSW Monitor Malfunction |
|
| B2276 | ACCR Signal Circuit Malfunction |
|
| B2277 | Detecting Vehicle Submersion | Power source control ECU |
| B2278 | Engine Switch Circuit Malfunction |
|
| B2281 | "P" Signal Malfunction (Cable-Information does not Match to Bean-Information) |
|
| B2282 | Vehicle Speed Signal Malfunction (Cable-Information does not Match to Bean-Information) |
|
| B2283 | Vehicle Speed Sensor Malfunction |
|
| B2284 | Brake Signal Malfunction (Cable-Information does not Match to Bean-Information) |
|
| B2285 | Steering Lock Position Signal Circuit Malfunction |
|
| B2286 | Runnable Signal Malfunction |
|
| B2287 | LIN Communication Master Malfunction |
|
| B2288 | Steering Lock Signal Circuit Malfunction |
|
| B2289 | Key Collation Waiting Time Over |
|