LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Avalon XLS >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Engine Fuel System >> Fuel Pressure Pulsation Damper >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Fuel Pressure Pulsation Damper: Installation

  1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY 
    1. Apply a light coat of spindle oil or gasoline to a new O-ring and install it to the fuel pressure pulsation damper.
    2. Install the fuel pressure pulsation damper to the fuel delivery pipe.
    3. Install the clip.
  2. INSTALL INTAKE AIR SURGE TANK  (See INSTALLATION )
  3. INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE  (See INSTALLATION )
  4. INSTALL COWL TOP PANEL OUTER  (See INSTALLATION )
  5. INSTALL WINDSHIELD WIPER MOTOR & LINK ASSEMBLY  (See INSTALLATION )
  6. INSTALL COWL TOP VENTILATOR LOUVER RH 
  7. INSTALL WINDSHIELD WIPER ARM AND BLADE ASSEMBLY RH  (See INSTALLATION )
  8. INSTALL WINDSHIELD WIPER ARM AND BLADE ASSEMBLY LH  (See INSTALLATION )
  9. ADD ENGINE COOLANT  (See REPLACEMENT )
  10. CONNECT BATTERY NEGATIVE TERMINAL 
  11. INSPECT FOR ENGINE COOLANT LEAK  (See REPLACEMENT )
  12. INSPECT FOR FUEL LEAK  (See ON-VEHICLE INSPECTION )
  13. INSTALL V-BANK COVER SUB-ASSEMBLY  (See INSTALLATION )
  14. PERFORM SYSTEM INITIALIZE 
    1. Some systems need initialization when disconnecting the battery terminal.
scientia non olet · About LEMON Manuals