April 5, 2026: LEMON Manuals is launched! Read the announcement.

Ignition Switch: Inspection

INSPECT IGNITION SWITCH ASSEMBLY

Check the resistance.

Using an ohmmeter, measure the resistance between the terminals.

Standard resistance

IGNITION SWITCH ASSEMBLY

Switch Condition	Tester Connection	Specified Condition
LOCK	-	10 kΩ or higher
ACC 1	(AM1) - 3 (ACC)	Below 1 Ω
ON	1 (AM1) - 3 (ACC) - 4 (IG1) 7 (IG2) - 8 (AM2)	Below 1 Ω
START	1 (AM1) - 2 (ST1) - 4 (IG1) 6 (ST2) - 7 (IG2) - 8 (AM2)	Below 1 Ω

Fig 1: Measuring Resistance Between Terminals Using Ohmmeter

G05109971

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

If the result is not as specified, replace the ignition switch.