LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Toyota >> 2007 >> Highlander Base, 2.4 D, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (Service Specifications) >> P112 Hybrid Vehicle Control System >> Torque Specifications
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Torque Specifications

WARNING: This page is about a different car, the 2007 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Part Tightened N*m kgf*cm ft.*lbf
MG 1 power cable at MG 1 power cable terminal 8.0 82 71 in.*lbf
MG 2 power cable at MG 2 power cable terminal 8.0 82 71 in.*lbf
No. 1 circuit breaker sensor at Inverter with converter assembly 8.0 82 71 in.*lbf
No. 2 inverter bracket at Inverter with converter assembly 25 255 18
No. 1 inverter bracket at Inverter with converter assembly 25 255 18
Connector bracket at Inverter with converter assembly 8.0 82 71 in.*lbf
Inverter with converter assembly at Body 21 214 16
Inverter cover at Inverter with converter 11 112 8.1
Hybrid control ECU at ECM 5.5 56 49 in.*lbf
Water pump with motor assembly at Body 7.0 71 62 in.*lbf
Frame wire at Floor panel 9.0 92 80 in.*lbf
Suspension crossmember at Body Bolt A: 113 1,152 83
Bolt B: 157 1,601 116
No. 1 wire harness protector at Body 9.0 92 80 in.*lbf
Frame wire at Engine room relay block 9.0 92 80 in.*lbf
Frame wire at No. 2 system main relay 5.6 57 50 in.*lbf
Frame wire at No. 3 system main relay 5.6 57 50 in.*lbf
Accelerator pedal rod at Body 7.5 77 66 in.*lbf