Front Speed Sensor: Removal

WARNING: This page is about a different car, the 2007 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT WHEEL
REMOVE FRONT FENDER LINER
REMOVE FRONT SPEED SENSOR
1. Disconnect the sensor connector.
  
  Fig 1: Connecting Sensor Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 bolts (A and B) and 2 sensor clamps from the body and front shock absorber.
  HINT:
  
  The bolt B is tightened together with the brake flexible hose clamp.
  
  Fig 2: Installing Sensor Clamps To Body And Front Shock Absorber With Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Remove the clip from the front shock absorber.
4. Remove the bolt and sensor.
  NOTE: Do not allow foreign matter to attach to the tip or connecting portion of the speed sensor.
  
  Fig 3: Installing Clip To Front Shock Absorber
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002