Data List / Active Test
WARNING: This page is about a different car, the 2007 Toyota Prius. However, it is still accessible from the selected car via links, so may be relevant.
- READ DATA LIST
HINT:
Using the intelligent tester's DATA LIST allows switch, actuator and other item values to be read without removing any parts. Reading the Data List early in troubleshooting is one way to save time.
- Connect the intelligent tester (with CAN VIM) to the DLC3.
- Turn the power switch ON (IG).
- Read the DATA LIST according to the display on the tester.
Hybrid vehicle control system
DIAGNOSTIC CHART (16 TO 17)Item Measurement Item / Display (Range) Normal Condition Diagnostic Note VEHICLE SPD Cruise control vehicle speed/ min.: 0 km/h (0 mph), max.: 255km/h (158 mph) Actual vehicle speed is displayed - MEMORY SPD Cruise control memorized speed/ min.: 1 km/h (0.6 mph), max.: 255 km/h (158 mph) Actual vehicle speed is displayed - THROTTLE Request opening angle/ min.: 0%, max.: 125% Actual throttle opening angle is displayed - CRUISE CTRL Cruise control system active condition/ON or OFF ON: Cruise control is activated
OFF: Cruise control is deactivated- MAIN SW (MAIN) CRUISE main switch signal (Main CPU)/ON or OFF ON: Cruise control main switch
ON-OFF button is pushed on
OFF: Cruise control main switch
ON-OFF button is pushed off"3" MAIN SW (SUB) CRUISE main switch signal (Sub CPU)/ON or OFF ON: Cruise control main switch
ON-OFF button is pushed on
OFF: Cruise control main switch
ON-OFF button is pushed off"3" CCS READY M Cruise control system standby condition (Main CPU)/ON or OFF ON <--> OFF: Switching each time ON-OFF button is pushed "1" CCS READY S Cruise control system standby condition (Sub CPU)/ON or OFF ON <--> OFF: Switching each time ON-OFF button is pushed "1" CCS INDICATOR M Cruise indicator signal (Main CPU)/ON or OFF ON: CRUISE main indicator light is on
OFF: CRUISE main indicator light is off"2" CCS INDICATOR S Cruise indicator signal (Sub CPU)/ON or OFF ON: CRUISE main indicator light is on
OFF: CRUISE main indicator light is off"2" CANCEL SW CANCEL switch signal/ON or OFF ON: Cruise control main switch is pulled to CANCEL
OFF: Cruise control main switch is not pulled to CANCEL- SET/COAST SW -/SET switch signal/ON or OFF ON: Cruise control main switch is pushed to -/SET
OFF: Cruise control main switch is not pushed to -/SET- RES/ACC SW +/RES switch signal/ON or OFF ON: Cruise control main switch is pushed to +/RES
OFF: Cruise control main switch is not pushed to +/RES- STP LIGHT SW1 M Stop light switch signal (Main CPU)/ON or OFF ON: Brake pedal is depressed
OFF: Brake pedal is released- STP LIGHT SW2 S Stop light switch signal (Sub CPU)/ON or OFF ON: Brake pedal is depressed
OFF: Brake pedal is released- STP LIGHT SW1 S Stop light switch signal (Sub CPU)/ON or OFF ON: Brake pedal is depressed
OFF: Brake pedal is released- SHIFT D POS Shift lever position sensor signal (D position)/ON or OFF ON: Shift position is D
OFF: Shift position is not D- VEHICLE SPD CHG Vehicle speed sudden change/ ON or OFF ON: Changed
OFF: Not changing- HINT:
"3" is OK but "1" is NG --> Hybrid vehicle control ECU failure
"1" is OK but "2" is NG --> DTC output or hybrid vehicle control ECU failure
"3" is OK but the CRUISE main indicator light does not turn on --> CRUISE main indicator light, wire harness, or hybrid vehicle control ECU failure